登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 机械机电类 > 车辆工程 > 正文

环卫压缩式垃圾车总体设计及刮板机构设计毕业论文

 2021-11-11 20:25:13  

论文总字数:59492字

Graduation project of Wuhan University of Technology

Overall design and scraper design of sanitation compact garbage truck

College:School of international education

Class:Vehicle engineering 1602

Student name:Chuqiang Lin

Tutor:Xun Liu

Statement of originality of dissertation

I hereby declare that the paper I submit is the research result of my independent research under the guidance of my tutor. This paper does not include any other work that has been published or written by an individual or group, except as specifically cited in the paper. I am fully aware that the legal consequences of this statement are my responsibility.

The author signature:

Day/month/year:

Power of attorney for use of dissertation copyright

The author of this dissertation fully understands the provisions of the university on the protection and use of the dissertation, and agrees that the university shall retain and send the copy and electronic version of the dissertation to the relevant dissertation administration department or institution, and allow the dissertation to be consulted and borrowed.I authorize the provincial excellent bachelor's thesis selection institution to incorporate all or part of the content of this dissertation into the relevant data for retrieval, and the dissertation can be saved and compiled by means of photocopying, reducing or scanning.

This dissertation is not confidential.

The author signature: Date:

The tutor signature: Date:

Abstract

The compressed garbage truck is a kind of vehicle used for garbage collection, compression and long-distance transportation. Due to the country's policy of urban-rural integration, the amount of garbage produced in the process of urban development is also on the rise, which means that the demand for compressed garbage trucks is also increasing. From the current market quantity and purchase quantity, China's compressed garbage truck is mainly based on the characteristics of urban household waste and road characteristics to carry out research and development. Although its function and structure are relatively perfect, there is still room for improvement. At the same time, the compressed garbage truck in the industry still has the problems of failure and structural damage due to too much force. Therefore, it is of great significance to study and experiment the structure of a new type of compressed garbage truck which can improve this kind of problem.

At the beginning of this paper, the achievements of domestic and foreign garbage trucks were investigated and analysed, and a compressed garbage truck with an effective volume of 10m and a compressed density of 0.7t/m was determined to be designed. By optimizing the design of the outer shell of the filling mechanism, the problem of collapse caused by force is solved to some extent.

CATIA was used for 3d modeling and finite element analysis for vehicle model manufacturing in this project. In the case of relatively reasonable results, the final generation of three-dimensional drawings. Its content mainly includes the following contents.

(1) designed a set of reasonable overall layout scheme of rear mounted compressed garbage truck. During the design process, gold ratio was used for the design of the initial scheme for many times, and experiments and modifications were carried out in the follow-up to make it reasonable.

(2) the height, width, longitudinal length, filling Angle, compression ratio and other parameters are designed through the target vehicle.

(3) this paper analyzes the possible shortcomings of the filling mechanism of current market models and carries out the optimization design, focusing on the optimization of the structure and making its size reasonable.

In this paper, a relatively reasonable structure of a new type of compressed garbage truck is proposed, which provides some ideas for the optimization and renewal of the traditional domestic compressed garbage truck.

Keywords: rear-mounted garbage compression vehicle; Overall layout plan; Filling mechanism; Finite element analysis

Content

1. Introduction1

1.1 background and purpose of the research2

1.2 Research status in domestic and abroad 2

1.2.1 Research status abroad2

1.2.2 Domestic research status 3

2. Working principle and general layout plan of rear loading compression garbage truck.6

2.1 Working principle 6

2.1.1 working principle of filling mechanism 6

2.1.2 Principle of hydraulic system 8

2.2 Overall design and parameters 10

2.2.1 Vehicle mass parameters 11

2.2.2 Engine parameters 13

2.3 Structure design of rear loading compression garbage truck 14

2.3.1 General layout of after loading compression garbage truck 14

2.3.2 Design of shovels 17

2.3.3 Design of feeding mechanism 21

2.3.4 Design of sliding plate 22

2.3.5 Design of scraper 23

2.3.6 Innovative design of filler 24

2.4 Design of hydraulic cylinder 26

3. Structural stress analysis32

3.1 Stress analysis of compressed garbage compartment 32

3.1.1 Grid division and material selection 32

3.1.2 Boundary conditions and load application 33

3.1.3 Results and analysis 33

3.2 Force analysis of scraper mechanism 34

3.2.1 Grid division and material selection 34

3.2.2 Boundary conditions and load application 35

3.2.3 Results and analysis 36

请支付后下载全文,论文总字数:59492字

您需要先支付 50元 才能查看全部内容!立即支付

微信号:bysjorg

Copyright © 2010-2022 毕业论文网 站点地图