论文总字数：13345字

摘 要

本课题是依据棉纺织厂的设计原则，对各生产车间按生产工艺进行规划，通过选择合适的参数材料进行工艺计算，使棉纺织厂各车间机器排列合理，提高了棉纺织工厂运转效率，并在一定程度上降低职工劳动强度。 这是一次尝试性设计，包括工艺流程选择、设备选型与配备、车间布置与机器排列等，还介绍了原料选择、厂址选择、厂区总平面布置等。设计内容有工作图纸和产品，设计要点如下：首先，厂址和地理位置的选择，其次，工艺设计，按照教学计划中的产品方案，选择了相应的工艺和进行相应的机器数量计算；然后，车间布置和机器排列，在保证产品生产和运输的基础上，生产车间分成了不同的部分，最后，图纸，包括车间机器排列图、厂区总平面布置图。

关键词: 棉织物 工艺流程 设备选型 车间布置 机器排列

ABSTRACT

This topic is based on the principles of cotton textile factory in the design, planning of each production workshop according to production technology, process calculation, by choosing appropriate parameters of the material make the workshops of cotton mills machine arrangement is reasonable, improve the efficiency of the cotton textile factory work, and to a certain extent, reduce the worker labor intensity. This is a tentative design, including the choice of the technological process, equipment selection and equipment, plant layout and machine arrangement, etc., and also introduced the raw material selection, site selection, general layout of premises, etc. Have working drawings and product design content, design key points are as follows: first of all, the site of factory and the choice of location, secondly, process design, according to the teaching plan of product solutions, choose the corresponding technology and the corresponding machine number; Then, arrange workshop layout and machine, to guarantee the production and transportation products, on the basis of the production workshop is divided into different parts, and finally, drawings, including workshop machine arrangement diagram, general layout of premises.

Key words: cotton fabrics; The process flow; Equipment selection; Plant layout; The machine is arranged

目 录

摘要…………………………………………………………………………………I

ABSTRACT………………………………………………………………………II

目录……………………………………………………………………………Ⅲ、Ⅳ

第一章 文献综述…………………………………………………………………1

1.前言………………………………………………………………………………1

1.1 棉织物………………………………………………………………………1

1.2 本文所设计印染厂可能存在的问题………………………………………2

1.3 本设计未来发展形势………………………………………………………3

第二章 工厂设计…………………………………………………………………5

1. 工程类型及规格………………………………………………………………5

2. 产品种类及设计分配的原则…………………………………………………5

3.工艺选择及建厂的原则………………………………………………………6

4.棉织物生产过程………………………………………………………………6

第三章 棉织物加工设备的选型、排列和计算…………………………9

1.选择设备的基本原则………………………………………………………9

2.设备选型……………………………………………………………………9

2.1前处理设备……………………………………………………………9

2.2染色设备………………………………………………………………9

2.3印花设备………………………………………………………………9

2.4整理设备………………………………………………………………9

3.染整设备的介绍……………………………………………………………11

3.1前处理设备 ……………………………………………………………11

3.2染色设备 ………………………………………………………………11

3.3 印花设备………………………………………………………………11

3.4 后整理设备……………………………………………………………11

4.设备计算……………………………………………………………………11

5.车间布置和设备排列……………………………………………………13

5.1车间排列原则 ………………………………………………………13

5.2 厂房结构和柱网尺寸的选择 ……………………………………13

5.3设备的平面排列 ……………………………………………………13

结语 ………………………………………………………………………………14

致谢 ………………………………………………………………………………15

参考文献…………………………………………………………………………16

年产5000万米棉织物印染工厂工艺设计

请支付后下载全文，论文总字数：13345字