1. 毕业设计（论文）的内容和要求

主要内容包括： 具体安排：第一周：文献查阅 查阅相关的文献，要求学习并掌握利用中国期刊网、web of science、ei、elsevier等查阅文献，不少于20篇。

第二周：英文文献的翻译，文献字数3000字以上 要求掌握专业英语翻译。

第三周：开题：完成开题报告及任务书，确定研究方向。

2. 参考文献

[1]. 汤静芳等, 聚苯乙烯/苄基木粉复合材料的染色研究. 中国塑料, 2014(10): 第29-35页. [2]. 李行温, 马来酸酐接枝PS相容剂的研究. 合成树脂及塑料, 2003(05): 第12-14 42页. [3]. Farsi, M., Effect of Nano-SiO2 and Bark Flour Content on the Physical and Mechanical Properties of Wood#8211;Plastic Composites. Journal of Polymers and the Environment, 2017. 25(2): p. 308-314. [4]. 张彰, 孙丰文与张茜, 酯化、醚化改性对木材热性能的影响. 南京林业大学学报（自然科学版）, 2009. 33(6): 第6-10页. [5]. 黄慧等, 酯化处理对竹材结构及热性能的影响. 林业科技开发, 2014(04): 第105-108页. [6]. Migneault, S., et al., Effects of wood fiber surface chemistry on strength of wood#8211;plastic composites. Applied Surface Science, 2015. 343: p. 11-18. [7]. 刘如, 曹金珍与彭尧, 木粉组分对木塑复合材料性能的影响研究进展. 化工进展, 2014(08): 第2072-2083页. [8]. Mertens, O., K. Christian Krause and A. Krause, Evaluation of wood fiber composites based on a novel simultaneous defibration and compounding process. Journal of Applied Polymer Science, 2018. 135(7): p. 45859. [9]. Gwon, J.G., et al., Physical and mechanical properties of wood-plastic composites hybridized with inorganic fillers. JOURNAL OF COMPOSITE MATERIALS, 2012. 46(3): p. 301-309. [10]. Zabihzadeh, S.M., et al., Physical and Mechanical Properties of Rapeseed Waste-filled LLDPE Composites. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2011. 24(4): p. 447-458. [11]. 王海燕等, KH550硅烷偶联剂对复合材料结构和介电性能影响. 功能材料, 2006(07): 第1091-1093 1097页. [12]. Stark, N.M. and L.M. Matuana, Characterization of weathered wood#8211;plastic composite surfaces using FTIR spectroscopy, contact angle, and XPS. Polymer Degradation and Stability, 2007. 92(10): p. 1883-1890. [13]. Guo, J., Y. Tang and Z. Xu, Wood Plastic Composite Produced by Nonmetals from Pulverized Waste Printed Circuit Boards. Environmental Science Technology, 2010. 44(1): p. 463-468. [14]. Sofina-E-Arab and M.A. Islam, Production of mahogany sawdust reinforced LDPE wood-plastic composites using statistical response surface methodology. JOURNAL OF FORESTRY RESEARCH, 2015. 26(2): 487-494. [15]. Yang, H., et al., Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel, 2007. 86(12-13): p. 1781-1788. [16]. 张洪吉等, 超临界二氧化碳/乙醇发泡体系制备聚苯乙烯微孔发泡材料. 塑料, 2010(05): 55-57 54. [17]. 翟文涛, 余坚与何嘉松, 超临界流体制备微发泡聚合物材料的研究进展. 高分子通报, 2009(03): 1-10. [18]. 殷小春与任鸿烈, 对改善木塑复合材料表面相容性因素的探讨. 塑料, 2002(04): 25-28 24. [19]. Farsi, M., Wood-plastic composites: influence of wood flour chemical modification on the mechanical performance. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010. 29(24): 3587-3592. [20]. GAO, L., et al., Flammability properties of wood fiber-recycled plastic composite. Journal of Beijing Forestry University, 2007. 29(1000-1522(2007)29:62.0.TX;2-86): 176-180. [21]. Muszynski, L., IMAGING WOOD PLASTIC COMPOSITES (WPCs): X-RAY COMPUTED TOMOGRAPHY, A FEW OTHER PROMISING TECHNIQUES, AND WHY WE SHOULD PAY ATTENTION. BIORESOURCES, 2009. 4(3): 1210-1221. [22]. Stark, N.M. and L.M. Matuana, Characterization of weathered wood#8211;plastic composite surfaces using FTIR spectroscopy, contact angle, and XPS. Polymer Degradation and Stability, 2007. 92(10): . 1883-1890. [23]. Nahar, S., et al., Comparative Studies of Mechanical and Interfacial Properties between Jute and Bamboo Fiber-Reinforced Polypropylene-Based Composites. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2012. 25(1): 15-32.

3. 毕业设计（论文）进程安排

起讫日期 设计（论文）各阶段工作内容 2017.12-2018.1 查阅文献 2018.1-2018.2 翻译英文文献、开题 2018.2-2018.4 利用亚临界流体挤出法制备复合材料，研究不同流体对复合材料的力学性能的影响 2018.4-2018.5 论文中期检查 2018.5-2018.6 1、进行复合材料的力学性能测试 2、对聚苯乙烯基木塑复合材料进行红外分析 3、进行扫描电镜分析 2018.6-2018.7 撰写论文，完成答辩