摘 要

设计包括。

根据有关规范，对各个系统进行设计。综合布线系统中采用房间的面积和类型对信息插座进行数量的计算，通过桥架和线槽做支架，将各种信息插座和配线间连接，主要配线为双绞电缆；火灾报警系统可根据建筑内部上墙面面积于类型计算火灾报警器数量，这种集中式火灾报警系统可以第一时间发现险情，并解决问题，用双绞电缆连接；安全防范系统设有监控报警、出入口控制，通过摄像头和读卡器，确认工作人员信息，保证建筑内安全；建筑设备监控系统通过温度传感器监控系统状态，在由计算集群网络内网运行自动化系统，调节室内温湿度；有线电视系统用信号接收器接收信号，在通过信号处理、信号放大器等，将信号传输给显示器，系统主要靠同轴线缆连接。

关键词：。

ABSTRACT

Design system includes integrated wiring, fire alarm, security, construction equipment monitoring, cable TV.

According to the relevant norms, the various systems design. The integrated wiring system uses the area and type of the room to calculate the number of information outlets, through the bridge and trunking to do the bracket, the various information outlets and wiring between the main wiring for the twisted pair cable; fire alarm system can be based on The internal wall area of the building on the type of calculation of the number of fire alarm, this centralized fire alarm system can be the first time to find dangerous situations, and solve the problem, with twisted-pair cable connection; security system with monitoring alarm, import and export control, through Camera and card reader to confirm the staff information to ensure the safety of the building; construction equipment monitoring system through the temperature sensor to monitor the system state, in the calculation of the cluster network through the network to run automated systems to adjust the indoor temperature and humidity; cable TV system with signal receiver Receive signal, through the signal processing, signal amplifier, etc., the signal transmission to the display, the system mainly rely on coaxial cable connection.

Key words: Integrated wiring Fire alarm Security construction Equipment monitoring cable Television

目录

1. 绪论……………………………………………………………1
2. 工程概述………………………………………………………1
3. 综合布线系统设计……………………………………………1

3.1综合布线特点………………………………………………………1

3.2综合布线系统的组成…………………………………………………1

3.2.1工作区子系统设计…………………………………………………2

3.2.2水平子系统设计……………………………………………………3

3.2.3干线子系统设计……………………………………………………4

3.2.4设备间子系统设计…………………………………………………4

3.2.5管理子系统设计……………………………………………………4

第四章火灾报警系统设计……………………………………………5

4.1系统概述……………………………………………………………5

4.1.1火灾探测…………………………………………………………5

4.1.2手动火灾报警按钮…………………………………………………6

4.1.3火灾应急广播………………………………………………………6

4.1.4消防电话……………………………………………………………6

4.2消防线路的敷设………………………………………………………8

第五章安全防范系统设计……………………………………………8

5.1系统定义与构成………………………………………………………7

5.1.1前端摄像机…………………………………………………………7

5.1.2传输部分…………………………………………………………9

5.1.3存储部分…………………………………………………………8

5.1.4控制部分…………………………………………………………9

5.1.5显示部分…………………………………………………………9

5.2出入口控制系统……………………………………………………9

5.2.1出入口控制系统结构………………………………………………10

第六章建筑设备监控系统设计………………………………………10

第七章有线电视系统设计……………………………………………11

第八章总结……………………………………………………………12

第九章致谢……………………………………………………………12

参考文献………………………………………………………………13

第一章绪论